Refrigerated display cases are designed to keep products at the required temperature while presenting them clearly and attractively to the customer. This is not one universal equipment type: a countertop display case near the till, a pastry display counter, a vertical panoramic display case and a display freezer solve different tasks.
In this category, the choice is usually between compact countertop models, LCT-type pastry display counters, newer low-energy PDA3-CTF display counters, vertical panoramic UPD models and special refrigerated or frozen display units. The right choice depends on the product, the display location, the required temperature, airflow, glass construction and everyday service convenience.
Before choosing a display case, start with practical questions: what product will be displayed, how long it will stay in the display, whether it is sensitive to drying, whether visibility from all sides is needed, what the ambient temperature is and whether the unit will be placed near doors, sunlight, heat sources or an air-conditioning airflow.
|
Situation |
Typical display case type |
Why |
|
Impulse sales near the till |
Countertop panoramic display case |
Small footprint, good visibility and convenient presentation for desserts, snacks or drinks. |
|
Cakes, pastries and desserts in a cafe |
LCT or PDA3-CTF pastry display counter |
Larger display area, rear sliding doors, LED lighting and convenient service access. |
|
Sandwiches, snacks and prepared food |
Display case with electronic controller and suitable temperature range |
Accurate temperature control and clear presentation are important. |
|
Maximum visibility from several sides |
Vertical 360° panoramic display case |
Products are visible from multiple directions and the height of the room is used efficiently. |
|
Frozen desserts or frozen products |
Display freezer |
Frozen products require freezing temperatures such as -22...-18 °C, not a positive refrigerated range. |
Several display cases may show a similar temperature range in the catalogue, but that does not mean they are equally suitable for every product. A cake, a sandwich, a chocolate dessert, packed salad and a drink behave differently in a display case.
Temperature is only one part of the decision. Air movement, moisture loss, product sensitivity to drying, packaging, display time and door opening frequency must also be considered. Ventilated cooling helps keep the temperature more even, but delicate uncovered products may dry faster if they stay in the airflow for too long. In that case, reduce display time, use suitable packaging or choose the display case according to the specific product.
Countertop display cases such as UPD60 or UPD80-type models are suitable for small displays on a bar, counter or near the till. They work well when the product must be visible from several sides but there is no space for a large floor-standing unit. They are commonly used for desserts, snacks, sandwiches, pastries, drinks or other impulse-sale products.
Their main strength is compact size and visibility. Their limitation is smaller volume and display area, so they should not be treated as the main long-term storage solution for larger quantities of product.
LCT-type display cases are a more robust countertop solution for pastries and desserts. They may have curved or flat front glass, stainless steel and glass construction, rear sliding doors, LED lighting and ventilated cooling. They are a good choice for cafes, bakeries or dessert counters where easy staff access from the rear is required.
Curved glass has a softer, more classic look, while flat glass often looks more modern and fits minimalist interiors. In practice, the shape is only one factor; ease of cleaning, rear-door convenience and the actual display area are just as important.
Floor-standing pastry display counters are intended for more professional presentation. The newer PDA3-CTF range replaces the previous LPD-3F range and features EU energy class B, temperature class 3M1, LED lighting under each shelf, rear sliding doors, front glass that can hinge forward for cleaning and an easy-to-clean condenser filter.
These models are worth choosing when the display must be not only cold but also visually representative: for pastries, cakes, desserts, sandwiches, prepared food or delicatessen products where visibility, a stable operating regime and convenient daily service matter.
Vertical panoramic display cases use the height of the room and allow products to be seen from several sides. They are suitable for desserts, cakes, prepared foods, drinks or premium displays where the case is visible in the sales area, not only behind the counter.
Their main advantage is visibility. However, because of the large glass area, they are particularly sensitive to location: direct sunlight, heat sources, entrance doors or air-conditioning airflow can increase condensation, energy consumption and make temperature maintenance more difficult.
Some panoramic models are not designed for positive refrigerated temperatures but for frozen product display. For example, a UPD400-F-type unit operates in the freezer range and is used for frozen products, desserts or frozen goods. It should not be confused with a +2...+8 °C refrigerated display case; it is a different temperature regime and a different use case.
Refrigerated display cases commonly use several temperature ranges: +2...+12 °C for compact countertop displays, +2...+8 °C for pastry displays, -1...+5 °C for 3M1 floor-standing display counters and -22...-18 °C for frozen displays. The numbers must always be interpreted together with the product type.
An electronic controller with a temperature display provides better control and makes the operating regime easier to monitor. This is especially important for food products where temperature is not only a matter of presentation, but also of safety and quality.
|
Practical rule |
Many refrigerated display cases use ventilated cooling. Fans distribute cold air more evenly through the display, helping to stabilise temperature across the shelves.
However, airflow can also dry sensitive products. Uncovered sliced desserts, sandwiches, salads or soft pastries may lose moisture faster. Products should not be kept in the display too long, should be covered or packed when appropriate, and the shelves should not be loaded in a way that blocks air circulation.
For a pastry or snack display, gross volume in litres is not always the most useful number. Often the more important question is how much usable shelf area is available, how deep the shelves are, whether the products can be arranged in a clear single layer and whether the customer can see the full display.
A small countertop unit may be highly effective near the till, while a larger floor-standing display counter provides more display area and better service ergonomics. When comparing models, look at total display area in m², shelf count, shelf dimensions and rear-door access.
A refrigerated display case sells through visibility as much as through temperature. Double-glazed glass, anti-fog front glass, heated or better-insulated glass zones, suitable LED lighting and easy access for cleaning directly influence product visibility.
Condensation usually appears when warm humid air reaches a cold glass surface. If the display case stands near entrance doors, in front of an air conditioner, in direct sunlight or in a very humid room, even a good unit may fog more often. This does not necessarily mean a fault; the cause is often installation location or ambient conditions.
LED lighting in refrigerated display cases is not only decorative. It helps the customer see the product, enhances colours and creates a clean, bright display. In PDA3-CTF-type counters, LED lighting under each shelf improves visibility on the lower display levels as well.
Lighting should not be the only selection criterion. If the product is sensitive to light, heat or drying, correct temperature, airflow, short display time and hygienic daily maintenance are more important.
|
Built-in installation |
Climate class indicates the ambient conditions under which the manufacturer tests the unit. Refrigerated display cases with large glass surfaces are sensitive to ambient temperature and relative humidity. For example, climate class 3 is commonly associated with about +25 °C and 60% RH, while class 4 is commonly associated with about +30 °C and 55% RH, depending on the manufacturer data.
This matters in small cafes, shops with large windows, summer trading locations or rooms where the temperature changes significantly during the day.
A good refrigerated display case should be attractive and easy to maintain. In practice, it matters whether the rear doors are convenient, whether the front glass can hinge forward for cleaning, whether shelves are easy to remove, whether the condenser filter is accessible and whether automatic defrost suits the daily operating routine.
A dirty condenser, blocked vents, overfilled shelves and poor installation location often cause more problems than the model itself. Maintenance convenience should therefore be part of the selection process.
If you need a small display near the till or bar, look at countertop UPD or LCT models. If the priority is presentation of cakes, pastries, desserts, sandwiches or prepared food, larger LCT or PDA3-CTF-type display counters are usually more suitable. If visibility from all sides matters, choose a vertical panoramic display case. If the products are frozen, choose a display freezer rather than a refrigerated display case.
If unsure, tell us what you plan to display, the required temperature, how long the product will stay in the display, the planned installation location and whether the unit will be built into a niche. With this information, the right equipment can be selected much more accurately than by litres or price alone.
A display refrigerator is usually a cabinet with glass doors for drinks or packed products. A refrigerated display case is more often used for active presentation of desserts, pastries, sandwiches, prepared food or products served by staff.
Not always. The temperature range may be similar, but product sensitivity to drying, airflow and display time can differ. The display case should be selected according to the specific product.
A countertop unit is suitable for small product quantities, impulse sales near the till, coffee areas or bars. It is not the main long-term storage solution for large quantities.
Choose it when you need a larger display area, representative product presentation and convenient service from the staff side. These units suit cafes, bakeries, dessert shops and delicatessen areas.
3M1 indicates that the unit is suited to retail chilled product conditions. Such models are better suited for products that require a lower and more stable regime, for example around -1...+5 °C.
Yes, if products are kept uncovered in the airflow for a long time. Ventilated cooling improves temperature evenness, but sensitive products may need shorter display time, packaging or covering.
The usual cause is warm humid air around the display. Entrance doors, draughts, air-conditioning airflow, direct sunlight and high room humidity all increase condensation risk.
Not recommended if direct sunlight reaches it. The large glass area receives heat, increasing refrigeration load, energy consumption and condensation risk.
A practical rule is at least 6-8 cm, but the manual for the specific model is more important. If the unit is installed into a niche or between furniture, air intake and hot air discharge must be checked in advance.
Only if sufficient ventilation and service access are preserved. We recommend consulting us before this type of installation.
Not in a way that blocks air circulation. Products should be arranged so that cold air can move through the display.
Compare not only price and volume. Check display area, shelf dimensions, temperature class, controller type, kWh/24h, climate class, cleaning convenience and installation requirements.
Alongside TEFCOLD models, INFRICO displays offer more ways to organise the service area: refrigerated reserve storage, low glass, assisted or self-service layouts, different display surfaces and finishes. Compare usable display area, product access, shelf layout and cleaning convenience as well as price and volume.
| Series | Best suited to | What to check |
|---|---|---|
| GLACE and MAGNUS | Keeping additional chilled stock close to staff. | Refrigerated reserve, white quartz worktop and 4000 K LEDs. GLACE has two fixed glass shelves; MAGNUS RU has one, while low-glass RULG has no additional shelf. |
| NIZA | A low display and a more open service area. | 1040 mm height. I changes the display surface to AISI 304; DT provides refrigeration and heating ranges. |
| LYON | A coordinated pastry display line, including low-glass layouts. | Standard-height and LG versions. Rear display doors are optional. Where offered, the extra shelf price is for one shelf. |
| MARIE | A tall, spacious display without separate reserve storage. | 1530 mm height, electronic control, electronic fans and hot-gas defrost. |
| ÁMBAR R/PR and ONIX | Several display levels and different customer-service layouts. | Assisted, self-service and double-service versions with curved or flat glass. ONIX uses AISI 304 construction; ÁMBAR I has an AISI 304 display surface. |
| COMBO | Combining refrigerated self-service with a neutral assisted-service display. | The lower section is refrigerated at +2 to +5 °C; the upper section is not refrigerated. These are not two chilled compartments. |
| LO and VITRA | Upright cake and dessert presentation with a compact floor area. | Static refrigeration, +2 to +10 °C, height-adjustable shelves. VITRA has triple low-emissivity glazing without aluminium profiles. |
| LO SOFT AIR and VITRA SOFT AIR | Upright displays with ventilated refrigeration. | Standard range -2 to +15 °C. The optional chocolate configuration specifies +15 to +18 °C and 40–60% relative humidity; it is not included in the standard cabinet. |
Compare displays with the same purpose and layout: countertop with countertop, upright with upright, and assisted-service with assisted-service. Shared dimensions, temperature, refrigeration and shelf attributes help narrow the choice. Display construction, service mode, front glass shape and refrigerated reserve attributes explain practical differences. Shelf levels exclude an additional base display level. An energy value marked “n.d.” means comparable data has not been provided, rather than zero consumption.
A higher investment is useful when you use the specific benefit: reserve storage keeps extra stock at the service point, the right access layout suits customer flow, and suitable display height and lighting present the range clearly. INFRICO products have a 2-year warranty.
1. Does DT mean two separate chilled zones?
No. NIZA DT versions specify refrigeration at +4 to +8 °C and heating at +40 to +50 °C. This does not mean two independent cold compartments. Confirm the required application and operating mode before ordering.
2. Does the I / AISI 304 option make the entire display stainless steel?
For NIZA, LYON and ÁMBAR I versions it identifies the display surface. Exterior finish is selected separately. The ONIX AISI 304 construction is described on each product card.
3. Are all shelves and doors shown included?
Use the product’s configuration guide. LYON extra shelves and rear display doors, GLACE rear doors and rear doors on certain MAGNUS versions are optional. LO SOFT AIR has chrome wire shelves as standard; glass shelves are available at no extra charge and may be shown in the illustration.
4. Are end panels included in price and width?
For this INFRICO batch, the complete freestanding display price and dimensions include both required end panels. Connecting several cabinets into one line requires individual layout and connection planning.
5. Which temperature should I choose for chocolate?
Follow the food producer’s storage requirements. LYON B and MAGNUS BU specify +7 to +12 °C, whereas the optional SOFT AIR chocolate configuration specifies +15 to +18 °C and 40–60% relative humidity. These versions are different.
6. How do I choose a finish?
Where a standard finish code field is available, use the complete series palette in the gallery. Colours outside the palette require a separate quotation. Upright LO and VITRA have silver / Silver Quartz included as standard, with white and black offered as paid options.
SS and PSS have an open front and a solid rear wall. Customer service and replenishment take place through the front. They may be planned along a wall while retaining the manufacturer’s ventilation and maintenance clearances. DS and PDS also have an open front but add rear staff doors: leave a working aisle behind the unit for loading, removal and replenishment.
P identifies the straight front profile; SS/DS have a curved front profile. Both remain self-service designs without a front-glass barrier, and front glass is not offered as an add-on for these versions. R and PR have front glass for assisted-service pastry and snack displays. Open-front SS/PSS/DS/PDS models are listed under multideck display refrigerators, while R/PR remain under refrigerated display cases. Compare the operating range on each card: ÁMBAR SS/DS and PSS/PDS temperature ranges differ.
A retail line can be complemented by a separate matching checkout module. It provides payment, packing and staff working space while keeping a coordinated furniture finish. It does not refrigerate or replace the display case. Electronic cash-register equipment is not included.
Display cards in these ranges offer the counter as an additional product with a stated surcharge and dimensions. “No additional checkout counter” adds no counter charge. NIZA, LYON and MAGNUS checkout-table dimensions exclude end panels; the final line footprint and interfaces are checked before ordering. AAM and ACM have different geometries, so choose corner modules against the site plan, staff aisles and workflow. An ÁMBAR checkout solution requires individual coordination; an unverified price is not added to the product.
1. Can every open-front refrigerator stand against a wall?
No. ÁMBAR SS/PSS have solid backs and front-only access. DS/PDS rear doors must remain accessible to staff. Every version needs ventilation and maintenance clearances.
2. Can front glass be added to close the self-service refrigerator?
It is not offered as an accessory for these ÁMBAR self-service versions. Choose a separate R or PR pastry display if you need front glass; the appropriate link is included on the self-service card.
3. Does the checkout-counter selection replace the ordered display?
No. It adds one separate non-refrigerated checkout module. The original card still defines the display dimensions, refrigeration range and other configuration.