Novameta VLU stainless steel storage table with hinged doors, 2100 × 600 mm

Novameta S Line VLU storage table with hinged doors, 2100 × 600 mm

A professional stainless steel table combining a food preparation surface with a storage area behind doors below it. It suits restaurants, hotels and production kitchens where utensils and containers need to be kept beside the preparation station. This product has a fixed VLU construction; no separate open-frame selection is required.

Hinged doors and front access

Hinged doors provide access from the front. Leave enough clearance for the door swing so that it does not obstruct an aisle or adjacent equipment. The manufacturer specifies triple-layer sound-dampening doors for this series. The 2026 catalogue specifies 4 doors and 6 legs for this 2100 mm version.

What is included in the base price?

A DML multilayer worktop and the VLU construction with hinged doors. Standard working-surface height is 900 mm, with a 50 mm rear upstand. The upstand is additional to the working height. The feet provide approximately +30/−35 mm levelling adjustment. This levels the table on the floor and is separate from the working-height mechanisms used on RLV and QLV tables.

Worktop and frame

The DML worktop combines a 2 mm AISI 304 stainless steel surface, aluminium composite and an aluminium bottom cover. The manufacturer specifies a waterproof, low-noise construction and heat resistance up to 90 °C. The S Line frame uses 40 × 40 mm stainless steel tubing and is described as based on DIN 18860-1. A DSL worktop with a 1.5 mm AISI 304 surface reinforced by stainless steel profiles can also be selected.

How to configure this model

1. Worktop and upstand. Select DML or DSL, the standard 50 mm upstand, another priced edge construction or a flat worktop without an upstand.
2. Sink. Choose a bowl if the workstation needs a washing area. Displayed sizes are restricted by the table dimensions and support construction. Final bowl position and clearances from the frame and doors must be agreed before manufacture.
3. Plumbing. Choose a set together with the corresponding sink. Waste, overflow and service positions must suit both the bowl and the installation.
4. Supports. A four-castor set is not offered for this six-leg version. Contact us to specify a suitable construction if mobility is essential.
5. Locks. The optional A-DS-FUDV1 set contains 2 locks for the door groups specified in the catalogue. The displayed surcharge covers the complete set.
6. Panels and accessories. Select side panels, rear cover, worktop-edge accessories and any waste opening to suit the workstation. The rear-cover surcharge is calculated for this table's length. An additional adjustable internal shelf, non-standard frame height and leg offsets are specified separately.

Before ordering

The base price is for the complete VLU table with worktop and door construction. Priced options change it by the displayed surcharge. Hanging drawer blocks for open-frame tables are not offered on this product. Use the order comment to specify sink, waste opening and service positions, or provide a sketch, so that the combined layout can be checked before manufacture. Manufacturer's model: DML-VLU-210/60/90. The photograph illustrates the series; door and support counts for this size follow the description.