excl VAT
Product code: MCR-NPD-3052A
Available quantity 4-6 weeks
| Manufacturer: | INTARCON |
INTARCON INTARTOP PRO MCR-NPD-3052A is a roof-mounted R290 monoblock for chiller cold rooms. Its PRO layout emphasizes service accessibility, electronic control and a telescopic roof-panel installation. R290 is an A3-class refrigerant (GWP 0.02).
| Room temperature | Cooling capacity | Recommended room volume |
|---|---|---|
| 0 °C | 3485 W | 45 m³ |
| +5 °C | 4207 W | 76 m³ |
| +10 °C | 4949 W | 140 m³ |
Manufacturer data refer to +35 °C ambient temperature. Volumes are indicative; final sizing requires a project-specific heat-load calculation.
Hermetic compressors, coated microchannel condenser, EC condenser fans, accessible service components, washable filter, hot-gas defrost and stainless-steel drain pan. Separated evaporator and condenser sections support roof-panel installation and maintenance.
XM670K controller: remote digital control and clock-based energy-saving and defrost cycles; up to eight compatible devices can be coordinated when suitable network accessories are installed. A complete communications kit is not assumed in the base configuration.
Telescopic roof mounting for 80–150 mm insulated ceiling panels, size 3; catalog power supply 400V 3N ~ 50Hz*. A–M references follow the 2026 manufacturer catalog p. 279 drawing. Do not interpret the lettered dimensions as a universal installation cut-out.
| Drawing letter | Dimension |
|---|---|
| A | 1227 mm |
| B | 1082 mm |
| C | 687 mm |
| D | 712 mm |
| E | 563 mm |
| F | 490 mm |
| G | 117 mm |
| H | 80–150 mm |
| I | 4 x Ø13 mm |
| J | 1130 mm |
| K | 1085 mm |
| L | 680 mm |
| M | 568 mm |
Exhaust ductwork requires the optional centrifugal condenser fan with horizontal or vertical discharge. The standard axial fan is not intended to overcome duct pressure loss. Available options include electrical connector and protection, Master–Slave control and ducting accessories. A circular duct adaptor or backdraft damper requires a compatible fan; check duct resistance and correct configuration before ordering.
R290 is an A3 flammable refrigerant. Qualified personnel must install and service the equipment under the manufacturer's safety rules. Cold-room construction, installation, commissioning and unloading are not included unless otherwise agreed. Made to order; lead time 4–6 weeks.
| Capacity and internal fittings | |
|---|---|
| Capacity Cooling Coldroom Units, m³ | 45 |
| Recommended cold-room volume at +0 °C, m³ | 45 |
| Recommended cold-room volume at +10 °C, m³ | 140 |
| Recommended cold-room volume at +5 °C, m³ | 76 |
| Controls and functions | |
|---|---|
| Controller | XM670K |
| Dimensions and weight | |
|---|---|
| Dimensions according to manufacturer drawing | A=1227; B=1082; C=687; D=712; E=563; F=490; G=117; H=80–150; I=4 x Ø13; J=1130; K=1085; L=680; M=568 |
| Mounting configuration | Telescopic 80–150 mm roof-panel mount; verify p. 279 installation drawing |
| Weight, kg | 164 |
| Energy and electrical data | |
|---|---|
| Input Power, W | 2450 |
| Maximum current draw, A | 9.3 |
| Voltage / Frequency, V/Hz | 400V 3N ~ 50Hz* |
| General information | |
|---|---|
| Delivery method | Made to order; lead time 4–6 weeks |
| Mounting type | Roof-mounted |
| Series | INTARTOP PRO (CR-NPD) |
| Refrigeration and ventilation system | |
|---|---|
| Condenser airflow with centrifugal fan, m³/h | 3000 |
| Condenser cooling | Air-cooled |
| Defrost Type | Hot-gas defrost |
| Evaporator airflow, m³/h | 2800 |
| Noise Level, dB(A) | 45 (at 10 m) |
| Refrigerant | R290 (A3) |
| Refrigerant Charge, g | less than 150 per circuit |
| Refrigerant GWP | 0.02 |
| Temperature and performance | |
|---|---|
| Cooling capacity at +0 °C, W | 3485 |
| Cooling capacity at +10 °C, W | 4949 |
| Cooling capacity at +5 °C, W | 4207 |
| Temperature group | Positive temperature |
There are no reviews for this product!
