Freezer room with 850 mm wide door CRNF2130WD

CRNF2130WD is a professional modular freezer room with external dimensions 2.1 × 3.0 × 2.2 m, a floor area of 6.3 m² and an internal volume of approximately 10.06 m³. The operating temperature range is −20…−10 °C. Construction uses 120 mm polyurethane-insulated panels, a non-slip SS304 stainless-steel floor and a maximum floor load of 2000 kg/m².

The low-temperature plug-in monoblock is installed at the factory in one insulated panel. The room is assembled from factory-prepared interlocking modular panels, so the panels do not need to be cut on site and no separate opening for the refrigeration unit has to be prepared. After assembly, connect the electrical supply and the refrigeration system is ready for commissioning.

Important: the cold room is delivered disassembled on a pallet. Assembly and installation work are not included in the product price.

WD version: this model is fitted with a 850 mm wide door. The door position is factory-fixed and cannot be moved to another wall during assembly, so the room orientation should be planned before ordering. The door handing / opening direction is also fixed.

The monoblock condenser rejects heat into the surrounding room, so the installation area must provide adequate ventilation, sufficient service clearance and separation from major heat sources. If heat cannot dissipate naturally, provide mechanical extract ventilation together with a supply of fresh air. Climate class 5 provides additional operating reserve at higher ambient temperatures, but it does not remove the need for good room ventilation.

The room has its own insulated floor, which creates a raised threshold at the doorway. An optional 80 mm access ramp can be ordered separately for trolley access.

The room is intended for frozen-food and other low-temperature storage applications within the stated operating range. A shelving / racking kit is available separately.

Installation video: watch the cold room assembly process