Sliding cold room door 1000×2000 mm – down to 0 °C

Sliding cold room door 1000×2000 mm – down to 0 °C

Designed for positive-temperature cold rooms and professional refrigerated spaces where a swinging leaf would obstruct the working area. 1000×2000 mm is the clear opening after installation, not the prepared structural opening size.

Construction

• 68 mm door leaf;
• injected polyurethane insulation, density 43 kg/m³;
• standard surface: 0.5 mm painted steel sheet with polyester coating, white RAL 9010;
• optional stainless-steel surface;
• plastic frame, thermo-welded at 45°, and plastic fittings;
• sliding system made from aluminium profile;
• hygienic rail cover included;
• lock with emergency opening from inside the cold room;
• automatic opening kit available.

Important before installation – side clearance

A sliding door needs not only the W×H opening but also free wall space on the side toward which the leaf slides. The door leaf must be able to clear the opening completely. Shelving, pipework, electrical cabinets, columns and other equipment must not interfere with this movement.

The technical drawing defines rail length as a function of W, so final side clearance must be checked against the drawing for the selected size.

Clearance above the door

Space is required above the door for the rail, supports and hygienic cover. Based on the supplied installation detail and an additional installation allowance, we recommend allowing approximately 440 mm of free space above the clear opening. Verify the final requirement against the technical drawing before preparing the room.

How to choose the options

1. Frame installation location

Sandwich-panel wall (frame B) – for installation in an insulated panel; the actual panel thickness must be specified. This 0 °C construction supports 60–80 mm. According to the B-frame drawing, the opening is W + 100 mm and H + 50 mm.

Masonry / concrete wall (frame E) – for installation at a masonry or concrete opening. According to the E-frame drawing, the wall opening corresponds to the W×H clear opening.

2. Wall type / thickness

For sandwich panels choose the actual thickness – 60 or 80 mm for this construction. For masonry / concrete choose “Not applicable – masonry / concrete wall”.

3. Door surface

The base price includes white painted steel RAL 9010. Stainless steel is available as a surcharge option.

4. Sliding direction

Direction is determined while facing the door from outside the cold room. Choose whether the leaf slides left or right when opening. Direction does not affect the price, but it determines which side of the opening must remain clear.

Selection guide

1. Determine the required W×H clear opening.
2. Check which side provides enough clear wall space for the leaf.
3. Allow adequate space above the opening for the rail and installation clearance.
4. Choose sandwich-panel or masonry / concrete installation.
5. For sandwich panels specify the actual panel thickness.
6. Select surface and sliding direction.
7. Before preparing the opening and rail area, verify all dimensions against the technical drawing.